Safety Base Sealbar Super | Underlayment waterproofing carpet

Dimension/roll: 20m x 1m
Weight in kg/roll: 24
Package type: paper
Material: Fiberglass, SBS-bitumen, top coating – sand, bottom – self-adhesive surface protected by a polymer film

Self-adhesive, self-sealing underlay carpet that is used for waterproofing of pitched roofs that has a slope greater than 12 degrees. Method of fixation – gluing.

Safety: 
The material does not contain asbestos, resins and hazardous substances.

Material storage: 
Rolls are stored in a strictly vertical position on a pallet, in a heated room, away from heat sources and direct sunlight.

Installation: 
After removing the lower protective anti-adhesive film, carefully (without the formation of air bubbles) glue it onto the solid base of the roof; 

The laying surface must be even, clean, dry and, if necessary, treated with a primer; 

The carpet is laid parallel to the eaves with an overlap (longitudinal overlap – 100 mm, transverse – 200 mm) from the eaves to the ridge. To improve the adhesion of the carpet, it is necessary to fix the carpet in the upper part along the longitudinal edge (nail spacing 20cm). 

Carpet’s installation temperature should be over +10°С.